How To Reset Canon Toner Cartridge After Refuelling

Refilling cartridges are one of the universal ways to extend their life. But all printers do not accept these reconstructed designs and see them as empty. Therefore, after refuelling, it is important to reset the system so that the canon toner cartridges can work efficiently. How to do it correctly for a certain type of printer can be found here.

Zero simple models

Some types of cartridges of this brand are not equipped with a chip to control the level of ink. Therefore, reset them with the help of technology may not be required. This can be done manually using a simple approach:

 1. Initially, you should get the device and cover the upper row of connections with tape. After that, the cartridge is inserted into the printer and the system starts. Almost all printers should give an error that it does not see the inverted design.

 2. After that, you need to get the cartridge again and in a similar way to glue the second row of contacts. The procedure is repeated again with the insertion and launch of the printer.

 3. For the system to reset the device, you just need to remove the tape and run the cartridge without it.

Other methods

Updating cartridges with built-in counters are performed using the following actions:

• Initially, the product is inserted into the printer. And it starts warning appearing on the screen that there is no ink in the system. When such an alert appears, you need to click "OK" or just agree with it.

• Then a reset window will appear. To reset the cartridge, you need to click the Stop/resume button. Hold it, preferably for 10 seconds. In some printers, the button has a diamond shape. Therefore, it is important that after these actions the warnings from the screen disappear. This will indicate that the cartridge is reset and can be printed on.

Another way to zero out is to use special programmers. This process is quite simple and does not require special knowledge:

1. The cartridge is removed from the printing device and is mounted in the programmer. To do this, combine all the contacts of these systems. If this is not done, no effect will work.

2. When the programmer finishes his work, he will alert you with a light bulb or other signal. After that, you can get the cartridge and use it as usual.

The technology of zeroing printing systems is quite simple in operation and requiring only care with accuracy.

Bottom Line

Hope, the above-mentioned points help you to find the most suitable option to change your canon toner cartridge. With these points, remember to take all desirable actions properly, so as to get results in the least time.